Author Topic: kvosd / mwosd Perfect Companion for naze32 (Read 4666 times)

Martink1974 · « **Reply #30 on:** August 02, 2014, 12:08:10 PM »

my setting in case others have prb getting a display

Smit80 · « **Reply #31 on:** August 16, 2014, 08:47:26 PM »

I think this is the board I've got

papa_lazerous · « **Reply #32 on:** August 17, 2014, 02:44:15 PM »

Smit that board will work but you will have to do a little soldering if you want to use certain functions

Sent from my SM-N9005 using Tapatalk

MrBen · « **Reply #33 on:** February 22, 2015, 08:24:38 PM »

just fitted another mwosd to my spanky6 and it always says disarmed regardless of whether Im armed or not, arming is on a switch BTW only thing I can see in config H is to disable displaying of armed status. Also it works fine on my spanky5 which is also armed via a switch

Martink1974 · « **Reply #34 on:** February 23, 2015, 02:04:07 AM »

Ita likely a clean flight issue as mode code is changed , guessing but might be a workround

MrBen · « **Reply #35 on:** February 23, 2015, 06:07:06 PM »

hmmm i thought it was working on my other spanky which also uses cleanflight, I will check and report back

MrBen · « **Reply #36 on:** February 27, 2015, 05:43:44 PM »

here is a weird one, I dont get any voltage feedback either when armed either only when disarmed, it seems like everything freezes when I arm!

MrBen · « **Reply #37 on:** February 27, 2015, 05:51:26 PM »

ah ha ! seems I needed to disable telemetry in cleanflight (which is basically the feedback via frsky) and now everything works as it should including the armed/disarmed message.