New Mini 600mw 5.8Ghz TX 12.8 grams and push button

[Tecnic]

New Mini 600mw 5.8Ghz TX 12.8 grams and push button

Been testing these for a while and quite happy they're all OK (it's the one I used through the tunnel)
They're not getting too hot unlike some of the mini 600mw around and performance is great, it certainly out did my Futaba T8FG yesterday on the mountain, my plane was going into RTH before I got close to losing video

http://www.tecnic.co.uk/600mw-32ch-Mini-Transmitter-RHCP-Antenna-TC1205.html



5.8G 32CH FPV 600mW Wireless AV Transmission Module TX, Support 32CH frequency, with clover leaf antenna, can reach in excess of 2000m without signal loss or 6km if using 14DBi directional antenna or 7 turn helical
 
Attention：output VCC equals to input voltage that means the voltage you supply is what comes out to the camera !
 These have been independently tested, giving true long distance FPV and with great penetration for woods flying
 Perfectly suited to mini quads due to their size and weight too and easy to set up channels
 
No soldering, no magnifying glasses required, just plug in and go
 On the channel I use I am getting and actuall output of 572 Watts after it settles down for a few seconds
 
Features:
 
◦ 600mW
◦ 32CH (4 bands, 8ch per band)
◦ Push button channel and band changing
◦ Super long range
◦ Compact
◦ 12.8g weight
◦ Wide voltage（7-26V） !!! output voltage = input voltage !!!
◦Easy installation
◦ Stable, no interference


Parameter :

 Input Voltage：7-26V
 Transmit Power：27DBm（MAX）
Module Consumption：4.5W（suggest 3S battery）
Current：350MA（12V）
Weight：12.8G excluding antenna
 Frequency：32 frequency （push button）