Author Topic: 3d Printing Project - Enclosed Spanky6 FPV Camera Servo Tilt (Read 136 times)

MrBen · « **on:** February 12, 2015, 08:04:08 PM »

First piece of the puzzle, this is the camera mount.

bigMouse · « **Reply #1 on:** February 13, 2015, 06:44:53 PM »

Ben, Can your program taper the stand-offs? helps miss the components near the holes on the board...

BIRDS-EYE-VIEW.NL · « **Reply #2 on:** February 14, 2015, 02:52:55 PM »

In case Ben can't do it I am sure that Spaceclaim can do it (its our CAD system)
Let me know if and what you want to be modified.

Wicher

MrBen · « **Reply #3 on:** February 15, 2015, 12:19:04 AM »

they are pretty thin to begin with, certainly doesnt cause any issues with the 'Sony 960H CCD Effio-V 800TVL Ultra WDR Camera 2.8mm Lens OSD' although I havent tried the standard PZ0420 yet and these printed standoffs are 1 or 2mm smaller than the regular hexagonal spacers I have used before to mount both of these cameras.