Author Topic: Sony 700tvl 10 x FPV Zoom Camera that fit's on a GoPro Gimbal (Read 151 times)

Tecnic · « **on:** January 30, 2015, 08:46:26 PM »

Well pleased with the results from this
Finally got the menu systems working for the OSD properly for customers and now the 10 x zoom is small enough and light enough to work on a flat plate GoPro brushless gimbal too

Daylight clours and WDR are as good as any standard camera and night vision is good too, well just what you'd expect from a quality Sony 700tvl CCD cam really

http://www.tecnic.co.uk/Sony-700tvl-CCD-10-x-Zoom-FPV-Camera.html


10 x Zoom FPV Camera 700tvl CCD


10 x FPV Zoom Camera Night Test

PS
My gimbal is a bit crap and I haven't got the knowhow or time to sort it out so please forgive the high freq vibes and jitters at points

Poor little CX-20 is well overloaded with gimbal, telemetry, VTX and zoom camera the freshly charged battery was triggering the voltage alarm as soon as I took off

bigMouse · « **Reply #1 on:** January 30, 2015, 09:08:45 PM »

If the gimbal controller is the Walker one or the Q-2D and is buzzing then try powering it on 2S rather than pissing around with it!

Tecnic · « **Reply #2 on:** January 30, 2015, 11:52:12 PM »

Quote from: bigMouse on January 30, 2015, 09:08:45 PM

If the gimbal controller is the Walker one or the Q-2D and is buzzing then try powering it on 2S rather than pissing around with it!

Thanks
It's the Chinese alexmos thingy, the BGC gui 2.2b works with it
I think it may just be hyper sensitive to any external influence such as the ribbon cable on the back of the zoom camera which goes to the control board that's stuck to the side of the quad