ThunderTiger Neptune SB1 Unboxing and Bath Test

[xxpitt]

if you recover that, i have a secnd disco for you to find  one each

[Cobs]

Lol no Dave, i wouldnt take a mans Disco from him just for finding it, the mission is the buzz for me  

Is number 2 near number 1?

[Tecnic]

Seen a vid of a plane crash into water and the guy stripped off and then found a fishing rod, dont know many peeps that carry boats tho lol

LOL Cobs
That was me 

[Cobs]

Haha good laugh that mate, could have been another Neptune Mission there
(always keep a boat in yer back pocket).

[bigMouse]

Hydroplane! 2 hrs  19 grams (each)

Ben I would shrink it smaller for a print test! (easy in cura)
Think I'd build it using the tip as base

Please make sure its what cobs wnats before printing them both out!
If you want them altered just ask!

Suggested Cura settings:

Layer height 0.15mm

shell thickness 1.2mm
bottom/top thickness 1.2mm

Bottom layer print speed 15 mm/sec
normal print speed 50 mm/sec

Fill density 25

Edit:
Added one with a fillet on tip

[MrBen]

Cobs Sub Elevator

[Cobs]

They look ideal guys, nice teamwork  , will get some onboard footage when fitted , shes in dry dock at the mo

[MrBen]

Done, nearly 7 hours 

[bigMouse]

They look very nice for ABS, I'm still having teething troubles with that stuff!

[MrBen]

Yes they look better than the black PLA! Im actually heating up the print bed now to try and print the tricopter body in this yellow ABS see how it comes out.

[bigMouse]

What temp nozzle you running for abs?

My pla prints are almost perfect.

[MrBen]

243c, my hotend apparently melts at 245, still havent fitted the e3d v6, bed about 100c

[Cobs]

They do look the biz there, nealry 7 hours ouch

[bigMouse]

I've been running 260c but it is soo close to the hot end melting temperature, will try what you are using!

[Martink1974]

how thick were layers ben , abs working much better for me now just took some experimentation ive printed the 6 main parts for new printer and they were big prints for abs
 
best abs ive found is white hobbyking abs

had zero warping on even tall prints with insulation round printer , had first clog other night running without fans but I need to convert  my k8400 to duel e3dv6 ,. found 90 deg plenty for bed with insulation round

my hotends sposed to melt without fans ben if it dies it dies , ive madev bracket for v6`s ready but it keeps going