Author Topic: Fatshark Immersion RC 200mw vTx? (Read 310 times)

loganj13 · « **on:** January 17, 2015, 06:42:52 AM »

Hi, just wondering if someone could share how they powered the Fatshark ImmersionRC vTx without using the 2-4s adapter it comes with? It doesnt say anywhere what the correct input voltage is and I really need the charging plug free to monitor power.

MrBen · « **Reply #1 on:** January 17, 2015, 07:01:44 AM »

200mw? do they do a 200mw or did you mean 600mw?
the input range of the 5.8ghz 600mw is 6-25v

loganj13 · « **Reply #2 on:** January 17, 2015, 08:28:50 PM »

Yup, I have a 200mW one that comes with the fatshark PredatorsV2. So I can power it with any of those? Then why do they have the thing you can plug 2-4S into? Does it help in some way? Thanks

Cobs · « **Reply #3 on:** January 17, 2015, 08:48:03 PM »

So you have the option to run it from your spare balance lead and it contains some filtering, im sure you can get a balance lead splitter (1 to 2)

MrBen · « **Reply #4 on:** January 17, 2015, 09:05:27 PM »

I guess you mean 250mw!

in which case specs are

Quote

The transmitter operates from a 7V-16V (2s-4s) input voltage and generates very little heat despite the broad input voltage range

loganj13 · « **Reply #5 on:** January 18, 2015, 05:31:31 PM »

Thanks for the info? Is the filtering really important for the vTx to work?

xxpitt · « **Reply #6 on:** January 18, 2015, 06:52:23 PM »

Not important for it to work. But it is important for a clear image

Cobs · « **Reply #7 on:** January 18, 2015, 07:30:44 PM »

In other words ... if you see interference (lines) in your video signal it may need filtering but you can make your own ...

http://fpvlab.com/forums/showthread.php?25691-Sander-Style-LC-Filter-remove-lines-in-your-video