Author Topic: Few more questions (Read 152 times)

loganj13 · « **on:** December 30, 2014, 07:42:03 PM »

People who are using fatshark vTx, how do you monitor voltage at the same time? The vTx is powered with the white charge/monitoring plug from the battery. Do you just time yourself?
My receiver came with awful instructions, what does the 7th input on the 6ch Rx mean? Its called: B/VCC. Also my Rx came with this little thing that I have no idea what its purpose it. Its a 3 pin male connector just like the ones that are used to connect to the rest of it and the KK board, but it has a single wire going from pin connector 1 to pin connector 3. Pin connector 2 is empty, but there is a thing on the wire from 1 to 3. Its the lower thing in this photo. Do I plug this into B/VCC? What is its purpose? Also that is not the same Rx I have in that photo I just grabbed that picture because it had the thing in it. Thanks for the info!

xxpitt · « **Reply #1 on:** December 30, 2014, 08:52:56 PM »

That's the bind plug to bind your rx to your tx. I just set a timer and fly off that. No need for ods if your as awesome as I am

Cobs · « **Reply #2 on:** January 05, 2015, 08:27:30 PM »

Taranis warns me when its time to come home but im probably timing it subconsciously, i usually do the far away/demanding stuff first then use the rest of the battery flying close by