Author Topic: Taranis + Naze Telemetry (Read 290 times)

Adiktid · « **on:** November 30, 2014, 06:54:00 PM »

I've telemetry running with my Naze32 and Taranis Plus, DR4-II RX w PPM.

On the Taranis I set vFas to receive the battery voltage and it all works fine, it needs arming until it starts seeing the data but it works..

Can I set the Taranis to give me an audible/voice alarm when it hits given voltages?

MrBen · « **Reply #1 on:** November 30, 2014, 06:59:18 PM »

yes you can mine gives me voice alerts for both RSSI and Voltage

Adiktid · « **Reply #2 on:** November 30, 2014, 07:39:09 PM »

Could you tell me what it means by a<x and if I could setup multiple, and select each voice or does it used a specific voice or just an alarm?

MrBen · « **Reply #3 on:** November 30, 2014, 07:41:22 PM »

if a is less than X means for example if voltage is less than 10.4v then ...

it plays the voice that is on there already although you could have it play customs sound files, it tells you what voltage or RSSI reading is at the time, so as the battery gets lower you will get different feedback