Post your FPV model pics!

[MK1G4V]

I thought It might be worth having dedicated Pics thread. A picture says a thousand words and all. Few times I have seen pics of quads and wings ect scattered around in various threads and have thought Ooo what's that antenna or cool led's wonder where You get those from?

So post your "completed" models and let the questions roll in or just a nice tidy thread full of great pics! I would start with my own quad but I wasn't happy with the route of the wiring so Its in pieces again here and the twinstar is having some mods at the time I post this.

Cheers!

Gav

[MrBen]

This is my 3s spanky with rcx motors and esc, however it has had some changes since th pic was took as its now on 5.8ghz video and 2.4ghz control, and I also removed the bluetooth and voltage OSD (I get voltage now through telemetry along with rssi)

[xxpitt]

show off

[MrBen]

LOL thats what the thread is for! I would take some new pictures but its dark and I cant be arsed setting up a studio light.

[mark1975]

My fleet by markcooper433, on Flickr

[MrBen]

My number 2 spanky



PZ0420 camera
RMRC 1.2ghx VTX
Minim wih MWOSD fw
Naze Full
Sunnysky 2300kv Motors
KISS 12amp ESCS
5x3 Props
Uses both 3s and 4s
EzUHF

AUW is 580g

[MK1G4V]

Very nice!

Damn all these clean tidy builds make mine look like Cak though a clean installation In the RCX/ZMR 250 is near neigh impossible with Esc's out on the arms and Osd and such.

Here's mine..









RCX/ZMR 250 G10
DYS 2300kv motors
Crappy 5x3 props
RCX 10a SimonK esc's
Full naze
Minim OSD MWOSD Fw
EZ Uhf 4ch Rx
Fox 800mw Vtx (check out my mahoosive antenna)
1400mah lipo
Trusty Mobius lense A

[MrBen]

you need to ditch that vtx antenna, way too big

[mark1975]

I use the same vtx and I use the stock lawmate antennas work great if you know someone who has spare?

[MK1G4V]

I use the same vtx and I use the stock lawmate antennas work great if you know someone who has spare?

Well I had a nice little one on my racewood vtx but it got smashed in a crash.. I also have the law mate Vrx with a nice little antenna can I swap them round like Vrx antenna on the quad and vtx antenna on the vrx?

[mark1975]

yes you can mate I have the rubber duckie style on both my vrx lawmate and fox 800 vtx

[MK1G4V]

yes you can mate I have the rubber duckie style on both my vrx lawmate and fox 800 vtx

Like this one bud?

 http://cdn.dronesvision.net/320-thickbox_default/lawmate-12ghz-stock-dipole-antenna-11-13ghz.jpg

So I can drop this one from the lawmate  vtx and the Mahoosive one on the lawmate?
Just want to make sure before I fly off and loose signal 

[bigMouse]

Its the right frequency, just make sure that either the female or male connector has a pin inside, None is no good, in both is no good...

[mark1975]

Yes mate the exact one I use on mine

[mark1975]

http://instagram.com/p/vTzgqPvzsP/