MWOSD setup

[MK1G4V]

Use MWII

ermmmmm whut? lol

Ohhhhhhh I see... Will try when new naze comes!

 Cheers!

[MrBen]

on your screen shot you can see MWII i checked mine and it needs to be on/enabled

[MK1G4V]

on your screen shot you can see MWII i checked mine and it needs to be on/enabled

That's got it mate, Awesome!

[MrBen]

happy days!

[MK1G4V]

Can anyone help/guide me through setting up Rssi on the MWOSD.

Cheers!

[MK1G4V]

looking at this wiring diagram to try and get my rssi working.

http://fpvlab.com/forums/attachment.php?attachmentid=46222&d=1400097197

I am using the ezuhf 4ch Rx .Am I right In thinking I am assigning Rssi to channel 4 in the immersion tools program and using just the ground and signal wire from it to Run to the TXTSSI and GROUND Pins on the MWOSD similar to the brown and blue wires In the diagram above?

[MrBen]

assign rssi to channel 8 in immersion tools then aux4 in naze

[MrBen]

oh and you dont run any extra cables for rssi, it comes through the tx/rx pins between naze and mwosd

[MK1G4V]

Oh well that saves me some hassle if I dont have to run extra cables. But just to be clear I am assigning Rssi to channel 8 even though I am using 4ch Rx right?

And I noticed there Is a couple of options when selecting Rssi In immersion tools . analogue or digital or something to that tune..What should I be choosing from those too?

Cheers Ben

[MK1G4V]

Sorry that's Rssi and Link.. I take it its Rssi i am choosing lol

Actually my 4ch is obviously "greyed out" beyond channel 4 but i have PPM 1-12 I take it its PPM CH8 I am assigning to Rssi

[MK1G4V]

assign rssi to channel 8 in immersion tools then aux4 in naze

And setting Rssi to AUX 4 for the naze is done in the CLI in baseflight I presume? Any Idea what's the command for that mate?

EDIT: Never mind I got it " set rssi_aux_channel=4"