how do i update firmware on naze32?

[xxpitt]

looked all over but can't see where i update firmware, the base flight layout has all changed since i last used done it

[xxpitt]

never mind found it, i was connected to naze and needed to be disconnected

[MrBen]

doh!

[xxpitt]

but naze isn't powering rx, what would that be? all motors working in base flight so all esc are working, esc 1 is powering naze but naze not powering rx

[xxpitt]

think rx might of died somehow, powering it off the 5v from 12/5v bec does nothing either

[xxpitt]

just ignore me, having a brain fart today, was powering wrong pins on naze

[MrBen]

Double doh!

[bigMouse]

Power the Rx from ESC, then power the naze from Rx

[MrBen]

I read from timecop I think it was best to power the naze first

[bigMouse]

The low pin count on the naze makes it hard to do the other way around, unless you go esc to naze and esc to RX. Shouldn't make much difference to the operation either way, but nice to utilise spare pins on the Rx, keeps it cleaner and naze can never be powered up without the Rx.

Did timecop give a reason?