Author Topic: Final form (Read 466 times)

Adiktid · « **on:** July 10, 2014, 12:59:46 AM »

After six months or so into quads, and almost giving up due to frustration and impatience, I have the 'Final Form' of my mini. Radio and video are rock solid, although I could do with dropping to 1.2 for a bit better penetration

Lumenier QAV250 V1
Open Piolt CC3D Lumenier Edition
Lumenier 2000kv Motors
Lumenier 12a SimonK ESCs
OrangeRX OpenLRS Receiver
Lawmate 2.4GHz 500mw Video TX
Runcam PZ4020H taken out housing
IBCrazy Dipole coiled on ground plane
IBCrazy Cloverleaf
Gemfan 5030

I use Dominators with an external Lawmate Video receiver and have diversity controller on it's way to use with a second I have: Cloverleaf when I'm at a field and flying local, TBS Yagi for when I'm attempting distance.

OpenLRSng firmware is used on a 1w OrangeRX Module in a Turnigy 9XR with Megasound board, and receiver uses the same firmware and makes use of beacon mode. I also currently use the telemetry mod to send RSSI back to my TX but I am limited by 100mw output of the RX: I'm thinking MinimOSD with use of RSSI to solve this issue and disable the telemetry as the 1w module outputs 412mw.