Author Topic: 2 x 250 Clean and dirty mini quads for sale (Read 745 times)

Tecnic · « **on:** July 08, 2014, 12:28:31 PM »

Key features:

Clean/Dirty System for vibration damping
Built in power distribution board with lots of solder points for accessories
5mm GF arms
Built in powerfull front LED's
Total weight of frame components 136 grams

One is part built with 12 amp SimonK ESC's (no BEC)
It is fitted with a mini APM 2.6 with seperate compass and GPS unit (pre-wired and calibrated) tested in mission planner
I have the motors with it as well as props, you just need a sBec/uBec, your receiver, battery (around 1500mah 3s), and camera

Set up - 1:
Frame $60.80
Gemfan Props (x8) $10.82 (4 x white and 4 x yellow)
SimonK ESC's (x4) $37.84
Mini APM 2.6 $69.99
Motors ZMR 1804 2400kv CCW (x2) $22.22
Motors ZMR 1804 2400kv CW (x2) $22.22
Total = £136 inc UK delivery

Set up - 2
Frame $60.80
Gemfan Props (x8) $10.82 (4 x white and 4 x yellow)
SimonK ESC's (x4) $37.84
Mini APM 2.6 $69.99
Motors ZMR 1804 2400kv CCW (x2) $22.22
Motors ZMR 1804 2400kv CW (x2) $22.22
Price as above though I'd be very happy to keep the Mini APM for myself
Total = £136 inc UK delivery or
£95 inc Uk delivery without the APM

These are wickedly tough frames, total component weight exc electronics is 136 grams, the arms are 5mm GF, it has a built in power dist board making install light and easy with lots of extra solder points for other gear
You will need longer motor screws and to drill the holes in the arms for the small motors, I have some screws on the way an will bundle them in for you (M2 x 8mm hex), oh yes, be carefull of the awesome front LED lights, they'll blind you, they do have an on/off switch too