Author Topic: Naza V2 and all that goes with it (Read 664 times)

Vass · « **on:** April 20, 2014, 09:05:33 PM »

OK, biting the bullet and upgrading from Naza M Lite to Full on Naza V2

I get the Main controller, the LED, the GPS and the PMU V2
( whole lot new £ 199 from Scotland unless you guys know a cheaper place?)

Question is, If I buy the Naza iOSD, is there a spare plug for it or do I need to but the Can hub too ?

thanks in advance :-)
Vass

Martink1974 · « **Reply #1 on:** April 21, 2014, 01:31:42 AM »

There is plug for it , only get mini iosd it does same job just no data logging , IMHO don't need data logging when you have gs footage recorded. You only need cam us hub if you use muse as well , you can upgrade v1 to v2 spec completely also , I have done this just need to solder a resister and buy a v2 led and pmu

MrBen · « **Reply #2 on:** April 21, 2014, 06:20:29 AM »

page 32, as martin said you dont need the hub

http://download.dji-innovations.com/downloads/nazam-v2/en/NAZA-M_Quick_Start_Guide_v1.24_en.pdf

Vass · « **Reply #3 on:** April 21, 2014, 08:31:32 AM »

Thanks folks

Martink1974 · « **Reply #4 on:** April 21, 2014, 09:56:53 AM »

I would prolly not upgrade to v2 iF you have a v1 with v2 firmware they fly same you just need pmu and v2 led to sort led wiring tthen mod v1 controller like this , I have v1 moded and v2 there same