What did the postman bring you today?

[mark1975]

3x turnigy 3s 1300 30c for mini quad

[mark1975]

1x futaba lipo  battery for my tx

[bigMouse]

Couple of kk2,s and a bunch of extension leads...

[bigMouse]

1/2 doz sheets of grp board, this is for making some mini frames...

[xxpitt]

1/2 doz sheets of grp board, this is for making some mini frames...

Will the frames be Hand or machine cut. For sale or for yourself? Just curious

[bigMouse]

Usually just cut the parts by hand out of 1/8 ply although I'll machine the parts I have in mind for the mini quad in 1.6mm grp! cnc is a good option for complicated shapes and prototyping but it's virtually impossible to make to sell, can't compete with far east prices, just the material cost more to buy than the finished product!
Like this example http://www.myrcmart.com/zmr-xpower-4axis-quadcopter-barebone-frame-p-6273.html?osCsid=0vrhtqi5cusotfobn8q1955f74

That is made in CF 1.6mm sheet Complete bare frame: £6.50

[xxpitt]

yeah Chinese have got it down to a fine art

[Vass]

1.2 receiver
4xSimonK ESC's
ImmersionRC diversity 5.8 Rx
Fatshark patch panel
PAir of skews
Archos 604 PVR
Used extra300 park fly

Phew, took a bit of opening that lot this week. :-)

[bigMouse]

Another load of motors and ESC's, Hopefully these are for my personal use!

[Adiktid]

Another 9XR, EzUHF module and receiver, Multiwii Pro w GPS, Sonar and Bluetooth module, a hard case for the MW, and some 900MHz antennas...

No idea where half of this is going. Perhaps in a Ov3rquad :/

[Dusty]

why "another" 9XR? did your first one break?

[Adiktid]

why "another" 9XR? did your first one break?

I fly with my cousin, and we wanted todo some tandem flying once he gets a bit more confident.

[bigMouse]

Large consignment of props! That should keep me going for the summer...

[Dusty]

Technically, the postman didn't bring me anything, I went to pick up a local flyer's twinstar II

[xxpitt]

qav bottm clean plate and 50 button head screws