Author Topic: RangeLink installation - Turnigy 9X (Read 1695 times)

Dusty · « **on:** May 11, 2013, 09:39:00 PM »

Just some pictures of how I've installed RangeLink into my 9X.

Pretty easy if I'm honest, don't know what I was worried about.

cervri · « **Reply #1 on:** November 10, 2013, 11:35:49 PM »

ChrisB:
On your 2nd picture of your Rangelink install in the Turingy 9x, what is the connector called or where can I find one....PPM/+/and grnd connection.

Dusty · « **Reply #2 on:** November 10, 2013, 11:47:43 PM »

it was one of these with the wires re-organised

http://hobbyking.com/hobbyking/store/__37521__300mm_5_Pin_Molex_JR_to_4_Pin_White_Connector_Lead.html

cervri · « **Reply #3 on:** November 11, 2013, 01:17:33 AM »

Thank you so much, I'll get one...I disassembled the old original module from my turnigy and removed the connector from the board. I managed to get the terminals to hot and messed it up.