Rmilec help

[Cupid Stunt]

OK folks a little help please
I'm just setting up my Rmilec for the first time on the ground and testing, all is OK except the RSSI...

I'm using a Cyclops Storm OSD, the output from the Rmilec receiver seems to be a constant 2.89 volts regardless of whether the transmitter is on or off, I still get the same voltage whatever ?

Obviously calibrating the min/max in the Cyclops is fruitless and I just get an RSSI diplay which jumps around wildly (I assume because the min is pretty much the same as the max)

Any ideas ?

Thanks in advance

[Cupid Stunt]

OK never mind
The manual is a little confusing to my simple brain
I had the RSSI cable connected to the PPM pins, turns out it needs to be connected to the Analogue pins (same pins as the binding jumper)

[Dusty]

does it work now?

I want to get Storm OSD for the Phantom and also have RMILEC

let me know how it gets on

[Cupid Stunt]

Yep, RSSI is working fine now

Must get this baby in the air, it's been sat doing nothing for too long now (Super Skysurfer)