Author Topic: Why you should know a 3D printerer (Read 405 times)

bigMouse · « **Reply #15 on:** January 19, 2015, 11:12:51 AM »

could try extra printed wedges, like 5 & 10 degrees, located with dowels, then the tie wraps to hold it all together

xxpitt · « **Reply #16 on:** January 19, 2015, 04:45:43 PM »

Nice idea. It does have lots of slots in the top. You could make something to lock into them. Then you could add and remove depending on the flying you was doing

mark1975 · « **Reply #17 on:** January 19, 2015, 04:49:01 PM »

like this ?

http://www.ebay.co.uk/itm/QAV-250-CAMERA-ANGLE-MOUNT-for-mobius-and-fpv-cameras-/261714957394?pt=UK_ToysGames_RadioControlled_JN&hash=item3cef6d5452